Jump to content

Alternative stress measures

From Wikipedia, the free encyclopedia
(Redirected from Kirchhoff stress tensor)

In continuum mechanics, the most commonly used measure of stress is the Cauchy stress tensor, often called simply the stress tensor or "true stress". However, several alternative measures of stress can be defined:[1][2][3]

  1. The Kirchhoff stress (𝝉).
  2. The nominal stress (𝑵).
  3. The Piola–Kirchhoff stress tensors
    1. The first Piola–Kirchhoff stress (𝑷). This stress tensor is the transpose of the nominal stress (𝑷=𝑵T).
    2. The second Piola–Kirchhoff stress or PK2 stress (𝑺).
  4. The Biot stress (𝑻)

Definitions

[edit]

Consider the situation shown in the following figure. The following definitions use the notations shown in the figure.

Quantities used in the definition of stress measures

In the reference configuration Ω0, the outward normal to a surface element dΓ0 is 𝐍≡𝐧0 and the traction acting on that surface (assuming it deforms like a generic vector belonging to the deformation) is 𝐭0 leading to a force vector d𝐟0. In the deformed configuration Ω, the surface element changes to dΓ with outward normal 𝐧 and traction vector 𝐭 leading to a force d𝐟. Note that this surface can either be a hypothetical cut inside the body or an actual surface. The quantity 𝑭 is the deformation gradient tensor, J is its determinant.

Cauchy stress

[edit]

The Cauchy stress (or true stress) is a measure of the force acting on an element of area in the deformed configuration. This tensor is symmetric and is defined via

d𝐟=𝐭 dΓ=𝝈T⋅𝐧 dΓ

or

𝐭=𝝈T⋅𝐧

where 𝐭 is the traction and 𝐧 is the normal to the surface on which the traction acts.

Kirchhoff stress

[edit]

The quantity,

𝝉=J 𝝈

is called the Kirchhoff stress tensor, with J the determinant of 𝑭. It is used widely in numerical algorithms in metal plasticity (where there is no change in volume during plastic deformation). It can be called weighted Cauchy stress tensor as well.

Piola–Kirchhoff stress

[edit]

Nominal stress/First Piola–Kirchhoff stress

[edit]

The nominal stress 𝑵=𝑷T is the transpose of the first Piola–Kirchhoff stress (PK1 stress, also called engineering stress) 𝑷 and is defined via

d𝐟=𝐭 dΓ=𝑵T⋅𝐧0 dΓ0=𝑷⋅𝐧0 dΓ0

or

𝐭0=𝐭dΓdΓ0=𝑵T⋅𝐧0=𝑷⋅𝐧0

This stress is unsymmetric and is a two-point tensor like the deformation gradient.
The asymmetry derives from the fact that, as a tensor, it has one index attached to the reference configuration and one to the deformed configuration.[4]

Second Piola–Kirchhoff stress

[edit]

If we pull back d𝐟 to the reference configuration we obtain the traction acting on that surface before the deformation d𝐟0 assuming it behaves like a generic vector belonging to the deformation. In particular we have

d𝐟0=𝑭−1⋅d𝐟

or,

d𝐟0=𝑭−1⋅𝑵T⋅𝐧0 dΓ0=𝑭−1⋅𝐭0 dΓ0

The PK2 stress (𝑺) is symmetric and is defined via the relation

d𝐟0=𝑺T⋅𝐧0 dΓ0=𝑭−1⋅𝐭0 dΓ0

Therefore,

𝑺T⋅𝐧0=𝑭−1⋅𝐭0

Biot stress

[edit]

The Biot stress is useful because it is energy conjugate to the right stretch tensor 𝑼. The Biot stress is defined as the symmetric part of the tensor 𝑷T⋅𝑹 where 𝑹 is the rotation tensor obtained from a polar decomposition of the deformation gradient. Therefore, the Biot stress tensor is defined as

𝑻=12(𝑹T⋅𝑷+𝑷T⋅𝑹) .

The Biot stress is also called the Jaumann stress.

The quantity 𝑻 does not have any physical interpretation. However, the unsymmetrized Biot stress has the interpretation

𝑹T d𝐟=(𝑷T⋅𝑹)T⋅𝐧0 dΓ0

Relations

[edit]

Relations between Cauchy stress and nominal stress

[edit]

From Nanson's formula relating areas in the reference and deformed configurations:

𝐧 dΓ=J 𝑭−T⋅𝐧0 dΓ0

Now,

𝝈T⋅𝐧 dΓ=d𝐟=𝑵T⋅𝐧0 dΓ0

Hence,

𝝈T⋅(J 𝑭−T⋅𝐧0 dΓ0)=𝑵T⋅𝐧0 dΓ0

or,

𝑵T=J (𝑭−1⋅𝝈)T=J 𝝈T⋅𝑭−T

or,

𝑵=J 𝑭−1⋅𝝈and𝑵T=𝑷=J 𝝈T⋅𝑭−T

In index notation,

NIj=J FIk−1 σkjandPiJ=J σki FJk−1

Therefore,

J 𝝈=𝑭⋅𝑵=𝑭⋅𝑷T .

Note that 𝑵 and 𝑷 are (generally) not symmetric because 𝑭 is (generally) not symmetric.

Relations between nominal stress and second P–K stress

[edit]

Recall that

𝑵T⋅𝐧0 dΓ0=d𝐟

and

d𝐟=𝑭⋅d𝐟0=𝑭⋅(𝑺T⋅𝐧0 dΓ0)

Therefore,

𝑵T⋅𝐧0=𝑭⋅𝑺T⋅𝐧0

or (using the symmetry of 𝑺),

𝑵=𝑺⋅𝑭Tand𝑷=𝑭⋅𝑺

In index notation,

NIj=SIK FjKTandPiJ=FiK SKJ

Alternatively, we can write

𝑺=𝑵⋅𝑭−Tand𝑺=𝑭−1⋅𝑷

Relations between Cauchy stress and second P–K stress

[edit]

Recall that

𝑵=J 𝑭−1⋅𝝈

In terms of the 2nd PK stress, we have

𝑺⋅𝑭T=J 𝑭−1⋅𝝈

Therefore,

𝑺=J 𝑭−1⋅𝝈⋅𝑭−T=𝑭−1⋅𝝉⋅𝑭−T

In index notation,

SIJ=FIk−1 τkl FJl−1

Since the Cauchy stress (and hence the Kirchhoff stress) is symmetric, the 2nd PK stress is also symmetric.

Alternatively, we can write

𝝈=J−1 𝑭⋅𝑺⋅𝑭T

or,

𝝉=𝑭⋅𝑺⋅𝑭T .

Clearly, from definition of the push-forward and pull-back operations, we have

𝑺=φ∗[𝝉]=𝑭−1⋅𝝉⋅𝑭−T

and

𝝉=φ∗[𝑺]=𝑭⋅𝑺⋅𝑭T .

Therefore, 𝑺 is the pull back of 𝝉 by 𝑭 and 𝝉 is the push forward of 𝑺.

Summary of conversion formula

[edit]

Key: J=det⁡(𝑭),𝑪=𝑭T𝑭=𝑼2,𝑭=𝑹𝑼,𝑹T=𝑹−1, 𝑷=J𝝈𝑭−T,𝝉=J𝝈,𝑺=J𝑭−1𝝈𝑭−T,𝑻=𝑹T𝑷,𝑴=𝑪𝑺

Conversion formulae
Equation for 𝝈 𝝉 𝑷 𝑺 𝑻 𝑴
𝝈= 𝝈 J−1𝝉 J−1𝑷𝑭T J−1𝑭𝑺𝑭T J−1𝑹𝑻𝑭T J−1𝑭−T𝑴𝑭T (non isotropy)
𝝉= J𝝈 𝝉 𝑷𝑭T 𝑭𝑺𝑭T 𝑹𝑻𝑭T 𝑭−T𝑴𝑭T (non isotropy)
𝑷= J𝝈𝑭−T 𝝉𝑭−T 𝑷 𝑭𝑺 𝑹𝑻 𝑭−T𝑴
𝑺= J𝑭−1𝝈𝑭−T 𝑭−1𝝉𝑭−T 𝑭−1𝑷 𝑺 𝑼−1𝑻 𝑪−1𝑴
𝑻= J𝑹T𝝈𝑭−T 𝑹T𝝉𝑭−T 𝑹T𝑷 𝑼𝑺 𝑻 𝑼−1𝑴
𝑴= J𝑭T𝝈𝑭−T (non isotropy) 𝑭T𝝉𝑭−T (non isotropy) 𝑭T𝑷 𝑪𝑺 𝑼𝑻 𝑴

See also

[edit]

References

[edit]
  1. ↑ J. Bonet and R. W. Wood, Nonlinear Continuum Mechanics for Finite Element Analysis, Cambridge University Press.
  2. ↑ R. W. Ogden, 1984, Non-linear Elastic Deformations, Dover.
  3. ↑ L. D. Landau, E. M. Lifshitz, Theory of Elasticity, third edition
  4. ↑ Three-Dimensional Elasticity. Elsevier. 1 April 1988. ISBN 978-0-08-087541-5.