Vai al contenuto

File:Reflex loudspeaker animation 2.gif

Contenuti della pagina non supportati in altre lingue.
File proveniente da Wikimedia Commons. Clicca per visitare la pagina originale
Da Wikipedia, l'enciclopedia libera.
    File originale (392 × 400 pixel, dimensione del file: 96 KB, tipo MIME: image/gif, ciclico, 4 frame, 0,2 s)
    Logo di Commons
    Logo di Commons
    Questo file e la sua pagina di descrizione (discussione · modifica) si trovano su Wikimedia Commons (?)

    Dettagli

    Descrizione
    English: Animation showing the operation of a reflex loudspeaker. Drawing shows a cross section through the speaker, the construction is cylindrically symmetrical. The reflex or reentrant loudspeaker, also called a megaphone, bullhorn, or loudhailer, is a type of folded horn speaker widely used in public address systems. It consists of a specialized diaphragm loudspeaker called a compression driver (a) attached to a metal or plastic horn (d). The driver has a small metal diaphragm (blue) driven to vibrate by the audio signal current flowing through a coil of wire (red) between the poles of a cylindrical magnet (green). The horn serves to couple the diaphragm more efficiently to the air, allowing it to radiate more of its energy as sound than a conventional horn speaker, making it louder. The horn sound path must be several feet long, so to make the speaker more compact the sound path is "folded" into a zigzag shape by several concentric exponentially-widening ducts. The sound waves pass forward through an inner tube (b) in the central projection in the horn, back through a larger concentric tube (c), then out through the surrounding horn (d).

    Reentrant loudspeakers can be 10 times as efficient as cone loudspeakers, and so their output can be 10 dB louder when operating from the same amplifier. However their frequency response is very uneven and limited, with a bandwidth of 300-400 Hz to 5 kHz, so they have a distinctive "tinny" sound and are only used for the human voice.

    In this animation the rate of vibration of the diaphragm and the speed of the sound waves are shown greatly reduced.
    Data
    Fonte Opera propria
    Autore Chetvorno
    Altre versioni

    This is an improved version of my previous animation Reflex loudspeaker animation.gif. Improvements:

    • Made speaker horn closer to shape of actual bullhorn, showed sound waves radiating from mouth.
    • Increased speed of animation to more realistically represent speaker vibrations.
    • Increased wavelength to more realistically represent actual sound waves in speaker; previous waves were in ultrasonic range.

    Licenza

    Io, detentore del copyright su quest'opera, dichiaro di pubblicarla con la seguente licenza:
    Creative Commons CC-Zero Questo file è reso disponibile nei termini della licenza Creative Commons CC0 1.0 Universal.
    La persona che ha associato un'opera con questo atto legale ha donato tale opera nel pubblico dominio rinunciando a tutti i diritti sull'opera in tutto il mondo, inclusi tutti i diritti connessi o altri diritti simili, per quanto permesso dalla legge. Puoi copiare, modificare, distribuire ed utilizzare l'opera, anche a fini commerciali, senza chiedere alcun permesso.

    Didascalie

    Aggiungi una brevissima spiegazione di ciò che questo file rappresenta
    Animation showing how a reflex horn loudspeaker works

    Elementi ritratti in questo file

    raffigura

    Valore sconosciuto senza un elemento Wikidata

    Cronologia del file

    Fare clic su un gruppo data/ora per vedere il file come si presentava nel momento indicato.

    Data/OraMiniaturaDimensioniUtenteCommento
    attuale02:51, 3 mar 2013Miniatura della versione delle 02:51, 3 mar 2013392 × 400 (96 KB)ChetvornoUser created page with UploadWizard

    La seguente pagina usa questo file:

    Utilizzo globale del file

    Anche i seguenti wiki usano questo file:

    Metadati